Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 21.06.2025 23:47

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

What does a fuse do?

(Dc diagram shown, AC is similar).

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Jurors in Harvey Weinstein trial reportedly fighting among themselves - BBC

But it can get overloaded, and no longer works.

First Sentence:

I post the exact comment here.

What movies have not aged well?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

2024–10–10[John johnson John Johnson ]

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

What historical event or person have you surprised hasn't been made into a Hollywood movie yet?

This is 'the assistant's answer'

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Why does my girlfriend keep asking me if I love her?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Why am I so tired of seeing homeless people all over the place?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

He then describes Rainy Season and Lightning.

One is “what exactly is in a ‘surge protector’ ? ”

Which diploma is best for a job?

Now when you have a certain ac resistance, then a current flows in a loop.

The bolt then partially travels down the line to your home.

These are simplified answers to the original question, and does not change anything I wrote above.

Will Ferrell Developing ‘Eurovision’ Movie Into Broadway Musical - The Hollywood Reporter

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

what exactly is a ‘surge’ protector?

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

What do dreams about dead people mean?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

This is where this question deviates from being a 'generic' question, and becomes more specific.

a photo is worth a thousand words.

Why was Boromir corrupted by the One Ring, but not Faramir in The Lord of the Rings?

These devices are installed between the “hot” and “neutral” and protective ground.

An AC voltage/ current source, and an ac inductive load.

What is lightning?

Is it possible for celebrities to remain anonymous in public without being recognized, even by accident?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

[old diagram got deleted by accident]

Because the load is inductive, the current lags the voltage.(by a bit).

If you received hand-me-downs as a child, how did they make you feel?

In schematic diagrams this is the symbol for a fuse:

There are two important concepts here.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Dark matter 'lampshades' dimming stars could solve one of the greatest scientific mysteries - Space

[image of Common-mode choke]

A fuse is a non-resetable over current circuit protector.

the problem then depends on "how fast does the fuse operate?".

This is where the MOV conducts again, and dissipated the energy.

The third is lightning and “how it gets conducted into a home.”

This is the picture of an electronic coil of wire wound around a core of magnetic material.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

but this device (an Inductor) … impedes the rapid changes in the current.

Edit 2024–10.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

It also is a device that limits the change in current flow.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

but I think this circuit , shows a few more pieces.

2024–10–16 [ OO OLAOYE OYEBODE ]

He then describes the function of a fuse.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

He then asserts :

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

At least they know the answer if they wanted it.

At one ohm, the resistor has a maximum of 1 watt power.

This device then solves the entire problem.

A circuit breaker is similar, but is resettable.

The MOV will conduct when the voltage exceeds 50% of line voltage.

For this case there are devices called Metal oxide varistors (MOV).

Here is a simplified AC power diagram.

This one hit behind the barn.

One

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

There are three different concepts here that are getting confused.

Upvotes:

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

eight

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

But… the neutral is now “floating” because of the 1 ohm resistance.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

nine

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

The other is “what does a “fuse” do?”

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

2024–10–14 [Omar Gharbi Omar Gharbi ]

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

So, the voltage could go up to 500 volts, and the fuse will not open up.

so, what happens?

Barnstars:

It seems Mohan does not understand the difference between a comment and an Answer.